Rising Damp in Burwood Heights
Rising damp treatment and subfloor ventilation for Burwood Heights' Federation and interwar homes.
Rising damp in Burwood Heights homes
Burwood Heights is a small suburb south of Burwood, between Enfield and Croydon Park, centred on the shops where Burwood Road meets Liverpool Road. Its streets hold Federation and interwar brick homes with timber floors, along with later houses and units. It’s in Burwood Council.
The older homes’ damp courses have now been in the ground for 80 to 110 years. Many have failed or been buried, and rising damp is a common problem.
Streets and ground
Burwood Heights sits on gently sloping clay ground that holds water after rain. Homes on the lower side of their blocks, or with gardens and paths built against the walls, tend to have the most damp.
What we usually find in Burwood Heights
- Paths and driveways laid against walls above the damp course
- Garden beds built up along side walls
- Tide marks and salt on internal walls
- Blocked subfloor vents
- Flaking paint along hallway skirtings
- Mould behind furniture on external walls
How we treat Burwood Heights homes
We take readings on each wall, check outside levels and look under the floor. Where walls are drawing water up, we install a chemical damp course along a mortar joint and replace salt-damaged plaster with a salt-resistant render. Where a path or garden bed is bridging the barrier, we deal with that too.
Subfloors in Burwood Heights
Older homes here often have blocked vents and parts of the subfloor closed off by extensions. Where damp air is trapped, we add subfloor ventilation.
Heritage and council
Burwood Heights is in Burwood Council. Internal work on damp walls in Burwood Heights and like-for-like repairs usually sit outside council approval, but ask council first if anything visible from the street will change.
Before you book
If there’s a brown line along your walls, our guide to rising damp tide marks explains what it means. There’s no charge to have a Burwood Heights home inspected, and the quote you get is fixed. We also cover nearby suburbs, including rising damp in Burwood and rising damp in Enfield.
Updated
Rising damp services in Burwood Heights
What we do for Burwood Heights homes, chosen to suit how each house was built.
Rising Damp TreatmentCause-first rising damp treatment for Inner West terraces, cottages and sandstone homes.
Chemical Damp CourseInjected chemical damp courses for solid brick and stone walls in Inner West homes.
Physical Damp CourseMembrane damp courses cut into brick and stone walls where injection isn't the right fit.
Subfloor VentilationVents and fan systems that clear damp air from under timber floors in Inner West homes.
Salt-Damaged Plaster RepairSalt-laden plaster removed and replaced with salt-resistant render after a damp course.
Waterproof Tanking and DrainageWaterproof tanking for below-ground walls and the drainage fixes that keep water away from the house.
Why Burwood Heights homeowners call us
15+ years on Inner West damp
Solid brick, sandstone footings and lime mortar are what we have worked on for more than 15 years, so the treatment is chosen for the wall, not the other way round.
Cause first
We measure moisture and check drainage, ground levels, leaks and ventilation before recommending a damp course, so you only pay for what fixes the problem.
Fixed-price quotes
You get a written, fixed-price quote after the inspection, with no obligation to go ahead.
How a Burwood Heights job runs
- We inspect and measureWe confirm it's genuinely rising damp, not a leak, and measure how far it has climbed.
- Install the damp courseWe inject or insert a new damp-proof barrier along the affected walls.
- Repair the plasterWe hack off salt-damaged render and replaster with a salt-resistant system.
- Dry out and checkThe wall dries over the following weeks, and we check back that it's holding.
Rising damp guides for Burwood Heights homeowners
- Tide marks on walls: what a rising damp tide mark meansWhy a brown or white line forms along the bottom of damp walls, how to tell rising damp from other causes, and what fixes it.
- Bubbling paint and blown plaster: is it rising damp?Why paint blisters and plaster crumbles near the floor of older homes, how to find the cause, and how to repair it so it stays fixed.
- Damp, musty smell in the house: finding the sourceWhere the musty smell in older homes comes from, the subfloor and wall problems behind it, and how to get rid of it for good.
- Mould low on walls and skirtings: condensation, rising damp or a leak?How to tell what is causing mould on your walls, why cleaning it off doesn't stop it, and how each cause is fixed.
- White salt deposits on walls: rising damp salt efflorescence explainedWhat the white crystals on damp walls are, why they keep coming back, and how salt-damaged walls are repaired.
Rising damp questions in Burwood Heights
Something else on your mind? Call 02 9158 9921 and ask.
Are Burwood Heights homes prone to rising damp?
The older Federation and interwar homes often are. Their damp courses are 80 to 110 years old, and many have been bridged by paths, driveways and gardens.
How long before I can repaint after treatment?
The new salt-resistant render can usually be painted once it has dried, typically within a few weeks. The wall behind keeps drying for months, which the render is designed to handle.
Do heritage terraces need special treatment?
Yes. Many Inner West terraces are heritage-listed or in conservation areas, so the fix has to be effective without damaging original brick, render or detailing. We use methods matched to the building fabric.
Is it rising damp, or something else?
Not always. Leaking gutters, blocked drains or lateral moisture can mimic rising damp. We diagnose the real cause first, so you don't pay for treatment you don't need.
How much does rising damp treatment cost?
It depends on the length of wall affected and the method. We give a fixed, no-obligation quote after a free on-site inspection.
How long until the wall dries out?
The new damp course works immediately, but a wall that's been wet for years needs time to release that moisture, typically a few months depending on wall thickness.
Which councils do you work in?
We work across Inner West Council, the City of Canada Bay, Burwood, Strathfield, and the Inner West parts of the City of Sydney and Canterbury-Bankstown.