Rising Damp in Chiswick
Damp courses, tanking and subfloor ventilation for Chiswick's riverside homes.
Rising damp in Chiswick homes
Chiswick is a small riverside suburb between Abbotsford and Drummoyne, with streets running down to the Parramatta River and parkland along the foreshore. Its homes are a mix of interwar bungalows, older Federation houses and newer residences built to take in the water views. It sits in the City of Canada Bay.
The older homes were built in brick on brick footings, with slate or bitumen damp courses that are now well past their best. Combined with the suburb’s sloping, riverside blocks, rising damp and water coming through walls from the side are both common.
Streets and ground
Chiswick’s streets fall towards the river, and many houses are built into the slope with lower levels or back walls against the ground. After rain, water runs downhill through yards and pools against those walls. Near the foreshore the water table is closer to the surface, and the clay soils stay wet.
What we usually find in Chiswick
- Lower-level walls against the slope, damp from the side
- Failed damp courses in older brick homes
- Paths and driveways laid hard against the house
- Extensions that closed off the original subfloor
- Salt and flaking paint near the floor in lower rooms
- Blocked vents behind gardens and decking
How we treat Chiswick homes
We start by working out how water is reaching each wall. Readings at several heights show whether it’s rising from below or coming in from the side. Rising damp in brick walls is treated with a chemical damp course. Walls against the slope get waterproof tanking on the inside face, with drainage improved outside. Salt-damaged plaster is then replaced with a salt-resistant render.
Subfloors in Chiswick
Older homes here often have uneven subfloors that step down the slope, with vents blocked by decks, gardens or later additions. Where damp air is trapped, we add subfloor ventilation, often a fan system for enclosed sections.
Heritage and council
Chiswick is in the City of Canada Bay. For most Chiswick homes, damp treatment inside and like-for-like repairs can go ahead without a council application. We keep original fabric where we can and use compatible materials.
Before you book
If there’s mould on walls in your lower rooms, mention it when you call. Our Chiswick inspections are free, and every quote is fixed and in writing. We also cover nearby suburbs, including rising damp in Abbotsford and rising damp in Drummoyne.
Updated
Rising damp services in Chiswick
What we do for Chiswick homes, chosen to suit how each house was built.
Rising Damp TreatmentCause-first rising damp treatment for Inner West terraces, cottages and sandstone homes.
Chemical Damp CourseInjected chemical damp courses for solid brick and stone walls in Inner West homes.
Physical Damp CourseMembrane damp courses cut into brick and stone walls where injection isn't the right fit.
Subfloor VentilationVents and fan systems that clear damp air from under timber floors in Inner West homes.
Salt-Damaged Plaster RepairSalt-laden plaster removed and replaced with salt-resistant render after a damp course.
Waterproof Tanking and DrainageWaterproof tanking for below-ground walls and the drainage fixes that keep water away from the house.
Why Chiswick homeowners call us
15+ years on Inner West damp
Solid brick, sandstone footings and lime mortar are what we have worked on for more than 15 years, so the treatment is chosen for the wall, not the other way round.
Cause first
We measure moisture and check drainage, ground levels, leaks and ventilation before recommending a damp course, so you only pay for what fixes the problem.
Fixed-price quotes
You get a written, fixed-price quote after the inspection, with no obligation to go ahead.
How a Chiswick job runs
- We inspect and measureWe confirm it's genuinely rising damp, not a leak, and measure how far it has climbed.
- Install the damp courseWe inject or insert a new damp-proof barrier along the affected walls.
- Repair the plasterWe hack off salt-damaged render and replaster with a salt-resistant system.
- Dry out and checkThe wall dries over the following weeks, and we check back that it's holding.
Rising damp guides for Chiswick homeowners
- Tide marks on walls: what a rising damp tide mark meansWhy a brown or white line forms along the bottom of damp walls, how to tell rising damp from other causes, and what fixes it.
- Bubbling paint and blown plaster: is it rising damp?Why paint blisters and plaster crumbles near the floor of older homes, how to find the cause, and how to repair it so it stays fixed.
- Damp, musty smell in the house: finding the sourceWhere the musty smell in older homes comes from, the subfloor and wall problems behind it, and how to get rid of it for good.
- Mould low on walls and skirtings: condensation, rising damp or a leak?How to tell what is causing mould on your walls, why cleaning it off doesn't stop it, and how each cause is fixed.
- White salt deposits on walls: rising damp salt efflorescence explainedWhat the white crystals on damp walls are, why they keep coming back, and how salt-damaged walls are repaired.
Rising damp questions in Chiswick
Something else on your mind? Call 02 9158 9921 and ask.
My Chiswick house steps down to the river. Why is the lower level damp?
Lower rooms on sloping blocks often have walls against the ground on the uphill side. Water comes through those walls from the side, which needs tanking and drainage rather than a standard damp course.
Can you work on a house with a newer extension?
Yes. We check how the extension meets the original house, because new slabs often block subfloor vents or bridge the old damp course.
Do heritage terraces need special treatment?
Yes. Many Inner West terraces are heritage-listed or in conservation areas, so the fix has to be effective without damaging original brick, render or detailing. We use methods matched to the building fabric.
Is it rising damp, or something else?
Not always. Leaking gutters, blocked drains or lateral moisture can mimic rising damp. We diagnose the real cause first, so you don't pay for treatment you don't need.
How much does rising damp treatment cost?
It depends on the length of wall affected and the method. We give a fixed, no-obligation quote after a free on-site inspection.
How long until the wall dries out?
The new damp course works immediately, but a wall that's been wet for years needs time to release that moisture, typically a few months depending on wall thickness.
Which councils do you work in?
We work across Inner West Council, the City of Canada Bay, Burwood, Strathfield, and the Inner West parts of the City of Sydney and Canterbury-Bankstown.