Rising Damp in Gladesville
Damp courses, tanking and subfloor ventilation for Gladesville's homes on the river slopes.
Rising damp in Gladesville homes
Gladesville sits on the northern side of the Parramatta River, across the Gladesville Bridge from Drummoyne, with Victoria Road running through its centre. Its streets hold Federation houses, interwar bungalows, some older cottages and a lot of later homes and units, many on sloping blocks with sandstone outcrops. It’s split between the City of Ryde and Hunters Hill Council.
The older homes here were built with slate or bitumen damp courses that have now failed in many cases, and the suburb’s steep, rocky blocks add side-on water problems. Both are common reasons Gladesville owners call us.
Streets and ground
Gladesville slopes steeply from the ridge along Victoria Road down to the river and to creek valleys on either side. Sandstone sits close to the surface in many places. Houses built into the slope often have back walls or lower rooms against rock or soil, and water running downhill after rain collects against them.
What we usually find in Gladesville
- Back walls and lower rooms against the slope, damp from the side
- Failed damp courses in Federation and interwar homes
- Sandstone bases wicking moisture into brick above
- Paths and retaining walls sitting against the house
- Salt and flaking paint in lower rooms
- Damp subfloors under rear rooms built against the hill
How we treat Gladesville homes
We test each wall and work out whether water is rising from below or coming in from the side. Rising damp in brick walls is treated with a chemical damp course. Walls against rock or soil get waterproof tanking on the inside face, with drainage behind retaining walls and along the base of the house improved where practical. Salt-damaged plaster is then replaced with a salt-resistant render.
Subfloors in Gladesville
Sloping blocks mean subfloors that are deep at the front and shallow or rocky at the back, often with vents only on the downhill side. Air doesn’t reach the back. Where readings show damp air, we add subfloor ventilation, usually a fan system for enclosed areas.
Heritage and council
Gladesville is split between the City of Ryde and Hunters Hill Council, and some streets have heritage controls. Internal work on damp walls in Gladesville and like-for-like repairs usually sit outside council approval, but ask council first if anything visible from the street will change.
Before you book
If there’s mould on walls in your lower rooms, mention it when you call. There’s no charge to have a Gladesville home inspected, and the quote you get is fixed. We also cover nearby suburbs, including rising damp in Drummoyne and rising damp in Abbotsford.
Updated
Rising damp services in Gladesville
What we do for Gladesville homes, chosen to suit how each house was built.
Rising Damp TreatmentCause-first rising damp treatment for Inner West terraces, cottages and sandstone homes.
Chemical Damp CourseInjected chemical damp courses for solid brick and stone walls in Inner West homes.
Physical Damp CourseMembrane damp courses cut into brick and stone walls where injection isn't the right fit.
Subfloor VentilationVents and fan systems that clear damp air from under timber floors in Inner West homes.
Salt-Damaged Plaster RepairSalt-laden plaster removed and replaced with salt-resistant render after a damp course.
Waterproof Tanking and DrainageWaterproof tanking for below-ground walls and the drainage fixes that keep water away from the house.
Why Gladesville homeowners call us
15+ years on Inner West damp
Solid brick, sandstone footings and lime mortar are what we have worked on for more than 15 years, so the treatment is chosen for the wall, not the other way round.
Cause first
We measure moisture and check drainage, ground levels, leaks and ventilation before recommending a damp course, so you only pay for what fixes the problem.
Fixed-price quotes
You get a written, fixed-price quote after the inspection, with no obligation to go ahead.
How a Gladesville job runs
- We inspect and measureWe confirm it's genuinely rising damp, not a leak, and measure how far it has climbed.
- Install the damp courseWe inject or insert a new damp-proof barrier along the affected walls.
- Repair the plasterWe hack off salt-damaged render and replaster with a salt-resistant system.
- Dry out and checkThe wall dries over the following weeks, and we check back that it's holding.
Rising damp guides for Gladesville homeowners
- Tide marks on walls: what a rising damp tide mark meansWhy a brown or white line forms along the bottom of damp walls, how to tell rising damp from other causes, and what fixes it.
- Bubbling paint and blown plaster: is it rising damp?Why paint blisters and plaster crumbles near the floor of older homes, how to find the cause, and how to repair it so it stays fixed.
- Damp, musty smell in the house: finding the sourceWhere the musty smell in older homes comes from, the subfloor and wall problems behind it, and how to get rid of it for good.
- Mould low on walls and skirtings: condensation, rising damp or a leak?How to tell what is causing mould on your walls, why cleaning it off doesn't stop it, and how each cause is fixed.
- White salt deposits on walls: rising damp salt efflorescence explainedWhat the white crystals on damp walls are, why they keep coming back, and how salt-damaged walls are repaired.
Rising damp questions in Gladesville
Something else on your mind? Call 02 9158 9921 and ask.
My Gladesville home is built into the slope. Why is the back wall damp?
Walls against the hillside take on water from the side, especially after heavy rain. That needs tanking and drainage rather than a standard damp course, which only stops water rising from below.
Do you work on both sides of Victoria Road?
Yes. We cover all of Gladesville, including the parts in the City of Ryde and Hunters Hill.
Do heritage terraces need special treatment?
Yes. Many Inner West terraces are heritage-listed or in conservation areas, so the fix has to be effective without damaging original brick, render or detailing. We use methods matched to the building fabric.
Is it rising damp, or something else?
Not always. Leaking gutters, blocked drains or lateral moisture can mimic rising damp. We diagnose the real cause first, so you don't pay for treatment you don't need.
How much does rising damp treatment cost?
It depends on the length of wall affected and the method. We give a fixed, no-obligation quote after a free on-site inspection.
How long until the wall dries out?
The new damp course works immediately, but a wall that's been wet for years needs time to release that moisture, typically a few months depending on wall thickness.
Which councils do you work in?
We work across Inner West Council, the City of Canada Bay, Burwood, Strathfield, and the Inner West parts of the City of Sydney and Canterbury-Bankstown.